Drill Capacity:
Drill Capacity:
3" (Steel)
76.20mm (Steel)
Max. Part Length:
Max. Part Length:
120"
3048.00mm
Number of Drill Heads:
Number of Drill Heads:
1
1
Number of Spindles:
Number of Spindles:
1
1
Drill Head Stroke:
Drill Head Stroke:
120"
3048.00mm
Feed Rate:
Feed Rate:
0.1 IPM - 30 IPM
0.04 mm/sec -12.70 mm/sec
Rapid Retraction of Drill Head:
Rapid Retraction of Drill Head:
150 IPM
63.50 mm/sec
Max. Spindle Speed:
Max. Spindle Speed:
0 - 2000 RPM
0 - 2000 RPM
Min. - Max. Part Diameter:
Min. - Max. Part Diameter:
5" - 16"
127.00mm - 406.40mm
Max. Part Weight:
Max. Part Weight:
6750 Lb.
6750 Lb.
Spindle Centerline Parallel to Slide Ways:
Spindle Centerline Parallel to Slide Ways:
0.0005 in / ft
0.0005 in / ft
Face of Pressure Head Perpendicular to Spindle:
Face of Pressure Head Perpendicular to Spindle:
0.0005"
0.01mm
Spindle Runout:
Spindle Runout:
0.0002"
0.01mm
Equipped With:
C Rotation B/C Axis
C Rotation B/C Axis
U Axis Pull Bore
U Axis Pull Bore
X Axis Fixture Table
X Axis Fixture Table
Z Axis Spindle
Z Axis Spindle
Pneumatic Lift Assist: Counter Rotation Assembly
Pneumatic Lift Assist: Counter Rotation Assembly
Part Steady Rest & U-Axis Fixture Table
Part Steady Rest & U-Axis Fixture Table
35.5" 3-Jaw Chuck w/ 17" Hole & Adapter Plate
901.70mm 3-Jaw Chuck w/ 431.80mm Hole & Adapter Plate
25" 3-Jaw Chuck w/ 11" Hole; Adapter Plate & Sleeve Insert
635.00mm 3-Jaw Chuck w/ 279.40mm Hole; Adapter Plate & Sleeve Insert
(2) Vibration Dampen Carriage Tube Mill Guides
(2) Vibration Dampen Carriage Tube Mill Guides
Work Holding Steady Rest w/ Air Assist
Work Holding Steady Rest w/ Air Assist
1500 PSI Fixed Displacement High Pressure Gear Pump
105.45 kgs./sq.cm. Fixed Displacement High Pressure Gear Pump
w/ AC Variable Frequency Drive; 117 GPM Max
w/ AC Variable Frequency Drive;442.85 liters/min Max
500 Gal. Coolant System Tank Capacity
1893 liters Coolant System Tank Capacity
GE Fanuc Power Mate CNC Control
GE Fanuc Power Mate CNC Control
40 HP Spindle Motor
29.83 kw Spindle Motor
Chip Conveyor
Chip Conveyor
Large Quantity of Various Size Drill Heads, Counterboring Heads
Large Quantity of Various Size Drill Heads, Counterboring Heads
Carbide Inserts, Drill Tubes, Adapters, Connectors,
Carbide Inserts, Drill Tubes, Adapters, Connectors,
Driver Mounts, Split Clamps & Seal Rings, Bearings, Misc. Spares
Driver Mounts, Split Clamps & Seal Rings, Bearings, Misc. Spares
Dimensions & Weight:
365"x 96"x 100", 50000 Lbs
Dimensions & Weight:
50000 Lbs, 22675 Kg
Preliminary Specifications....