*Line Reinstalled in 2016*
*Line Reinstalled in 2016*
Material Processed:
Material Processed:
Alum. Alloys 1145, 1100, 3003, 7072 & 8111
Alum. Alloys 1145, 1100, 3003, 7072 & 8111
Temper:
Temper:
0 Thru H19
0 Thru H19
Strip Thickness Range:
Strip Thickness Range:
0.002" - 0.015"
0.05mm - 0.38mm
Coil Capacity:
Coil Capacity:
40,000 lbs
18140.00 kg
Entry Speed Width Range:
Entry Speed Width Range:
25" - 72"
635.00mm - 1828.80mm
Line Speed Max:
Line Speed Max:
2600 FPM
13208.00 mm/sec
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Unwind Reels
Unwind Reels
Coil O.D.:
Coil O.D.:
24" - 90"
609.60mm - 2286.00mm
Spool Size I.D. / O.D. / Length:
Spool Size I.D. / O.D. / Length:
23.75" x 26" x 72"
603.25mm x 660.40mm x 1828.80mm
12.812" x 16" x 66"
325.42mm x 406.40mm x 1676.40mm
12" x 16" x 27.5"
304.80mm x 406.40mm x 698.50mm
Unwind & Coil Stands to be designed to take up future spool length of 76"
Unwind & Coil Stands to be designed to take up future spool length of 76"
Rewind Reels
Rewind Reels
Reels Diameter O.D.:
Reels Diameter O.D.:
18" - 72"
457.20mm - 1828.80mm
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Spool / Core I.D.:
Spool / Core I.D.:
6", 10", 12", 16"
152.40mm , 254.00mm , 304.80mm , 406.40mm
Fibre Cores
Fibre Cores
Slitting System:
Slitting System:
Scissors Cut / Optional Square Knife
Scissors Cut / Optional Square Knife
Maximum 40 Cuts Plus Edge Trim
Maximum 40 Cuts Plus Edge Trim
Slitting Width Range:
Slitting Width Range:
0.6" - 46"
15.24mm - 1168.40mm
Exit Reels Diameter O.D. Max:
Exit Reels Diameter O.D. Max:
72"
1828.80mm
Exit Reels Diameter O.D. Min:
Exit Reels Diameter O.D. Min:
18"
457.20mm
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Depending on Material Type, Thickness, Spool, Core, Slitting Width
Spool / Core I.D.:
Spool / Core I.D.:
6" 10" 12" 16" 20"
152.40mm 254.00mm 304.80mm 406.40mm 508.00mm
Edge Trim Min / Max:
Edge Trim Min / Max:
0.5" - 2" per Side
12.70mm - 50.80mm per Side
Slit Width Tolerance:
Slit Width Tolerance:
+/- .004"
+/- 0.10mm
Jogging Speed (Approx):
Jogging Speed (Approx):
32.8 FPM
166.62 mm/sec
Acceleration / Deceleration:
Acceleration / Deceleration:
VO - V Max. in approx. 80 s
VO - V Max. in approx. 80 s
Instantaneous Stop:
Instantaneous Stop:
V Max - V0 in approx 40 s
V Max - V0 in approx 40 s
Emergency Stop:
Emergency Stop:
V Max - V0 in approx 10s
V Max - V0 in approx 10s
Winding Tension / Unwind:
Winding Tension / Unwind:
Max 12.65 N
Max 12.65 N
Winding Tension / Rewind 1:
Winding Tension / Rewind 1:
318 - 6328 N / 25% Taper Tension at OD
318 - 6328 N / 25% Taper Tension at OD
Winding Tension / Rewind 2:
Winding Tension / Rewind 2:
318 - 8438 N / 25% Taper Tension at OD
318 - 8438 N / 25% Taper Tension at OD
Elongation Unit Capability:
Elongation Unit Capability:
1.5 - 3% with a target of 2%
1.5 - 3% with a target of 2%
Machine Design:
Machine Design:
Drive Side on Right As Seen in Running Direction
Drive Side on Right As Seen in Running Direction
Voltage:
Voltage:
480V + 10-20% AC, 3 Phase, 60 Hz
480V + 10-20% AC, 3 Phase, 60 Hz
Control Voltage:
Control Voltage:
24V
24V
Total Supply Value:
Total Supply Value:
700 KVA
700 KVA
Air Continuous Pressure:
Air Continuous Pressure:
>/- 77 PSI
>/- 5.5 BAR
Consumption Approx:
Consumption Approx:
14.9 SCFM
24 NM3/H
Water Flow:
Water Flow:
53 cu. ft. / hour
1.5 m3/h
Equipped With:
Main Machine
Main Machine
Drive Side on the Right
Drive Side on the Right
Unwind with Stepped Expanding Heads
Unwind with Stepped Expanding Heads
Stretch Stand
Stretch Stand
Two Slitting Cassettes
Two Slitting Cassettes
Pusher Plates on Rewinds
Pusher Plates on Rewinds
Drives, Motors and SPS from Siemens
Drives, Motors and SPS from Siemens
Siemens Programming Unit w/ Modem and Programs
Siemens Programming Unit w/ Modem and Programs
Winding Shafts
Winding Shafts
2 Rewind Shafts 6"
2 Rewind Shafts 152.40mm
2 Rewind Shafts 10"
2 Rewind Shafts 254.00mm
2 Rewind Shafts 12"
2 Rewind Shafts 304.80mm
2 Rewind Shafts 16"
2 Rewind Shafts 406.40mm
Handling For Unwind Side, Including:
Handling For Unwind Side, Including:
Coil Car with Fixed Saddle
Coil Car with Fixed Saddle
Core Roller Table w/ Core Deposit
Core Roller Table w/ Core Deposit
Two Coil Deposit Stand Non-Driven (Spools 66", 72", 76")
Two Coil Deposit Stand Non-Driven (Spools 1676.40mm , 1828.80mm , 1930.40mm )
Empty Spool Roller Table w/ Spool Deposit
Empty Spool Roller Table w/ Spool Deposit
Handling For Rewing Side, Including:
Handling For Rewing Side, Including:
2 Finish Roll Transport Carts
2 Finish Roll Transport Carts
Edge Trim, Chopper & Transport, Air Seprator, Diverter Gate, Vacuum Hose, Maintenence Platform
Edge Trim, Chopper & Transport, Air Seprator, Diverter Gate, Vacuum Hose, Maintenence Platform
Dimensions & Weight:
Call Perfection Global for Dimensions, 0 Lbs
Dimensions & Weight:
0 Lbs, 0 Kg
Preliminary Specifications....